1.5" Single Jacket Wildland/Forestry Hose - Yellow

Regular price $106.80 Sale

Hurry! Only 3 left in stock - Order Soon!
3333

Availability: Available Unavailable

Product Type: New Fire Hose

Product Vendor: Fire Hose Supply

Product SKU: 1906557790

 8 Sold In The Last 24 Hours

Product Details

Designed for rigorous forestry applications. Features ring-spun polyester for added abrasion resistance. Lightweight construction. Yellow. First article tested and USDA approved, 5100-187c Type 2 Compliant. 600 test pressure; 900 burst pressure

See Compliant information below:

USDA first article tested and approved

Features

  • 5100-187c Type 2 compliant
  • Ring-spun polyester to aid abrasion resistance
  • Designed for rigorous forestry applications
  • Lightweight construction
  • Threaded or quarter-turn quick connect couplings

Jacket Construction

The jackets will be woven evenly and be free of defects, including knots, lumps, or unsightly disfigurations that could jeopardize the integrity of the hose assembly. The warp yarn shall consist of ring spun polyester yarn. The use of filament or entangled yarn is expressly forbidden due to the lack of inherent abrasion resistance. The filler yarns shall be constructed of high strength, low elongation, filament polyester to reduce weight and increase flexibility. The jacket construction shall be a 1-2 woven twill pattern with the 2 over-crossing on the exterior of the jacket.

Abrasion Impregnation

Hose assemblies are available with polymer impregnation that provide additional abrasion resistance. Standard color: yellow. Color shall be pure and even in each hose. Impregnated hose shall meet the requirements of USDA 5100-187 for abrasion resistance.

Lining

The lining shall be a single-ply extruded tube of synthetic polyurethane to resist zone. The polyurethane tube shall adhere to the jacket to prevent delamination. The finished product will meet and exceed all potable water Mil-H-24606B standards for the manufacturing of lightweight fire hose. The use of the polyurethane lined fire hose is designed to increase packing ability and applications where lightweight fire hose is desired. Key Type 2 may be manufactured with a thin-wall high tensile 1800 PSI EPDM rubber liner. Rubber lined products are an accepted alternative to polyurethane lined hose in accordance with 5100-187c Type 2 specifications.

Performance:

The minimum burst test pressure, when tested in accordance to NFPA 1961, on Key Type 2 diameters shall be 900 PSI/62 Bar. Service test pressures stenciled on the hose shall be in accordance with current minimum requirements of NFPA 1962. A valid USA/ULC Underwriters listing shall be in force. Lengths available up to 100 feet.

Type Use Service Pressure Test Pressure Burst Pressure
 Single Jacket   Medium Industrial  125-150 psi 250 psi 375 psi
Loading...

Your cart