Male Camlock Hose Fitting With "Hose Shank" & Clamps
Our aluminum quick connect camlock barb allow you to attach any hose. Then you can simply use your hose as a "camlock hose". These are the easiest and most convenient hose couplings you can find. With these "hose shanks" you can simply slide your hoses on, and band the hose down with our simple screw style clamps.
You don't need any special tools to operate camlock adapters. Just flip the handles up, insert the male end, and lock them down. This male camlock fitting will fit into a female camlock fitting.
- Body Material: Aluminum
- Camlock Male Diameter Sizes: 3/4", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 8" (Plug)
- Hose Shank Inside Diameter: 3/4", 1", 1-1/2", 2", 2-1/2", 3", 4", 5", 6", 8"
- Maximum Operating Pressure: 150 PSI
- Maximum Operating Pressure Using Screw Style Clamps: 50 psi
- Type: Quick Disconnect
- Straight Body With Two Openings
- Aluminum Is Corrosion & Tarnishing Resistant
- Seal: Buna-N
Hooking It Up
It takes about a minute to hook your hose up with these connectors.
- Slide your hose straight into the barb end.
- Band it together with (2) screw operated hose clamps.
- That's it, you're finished!
The standard screw style hose clamps are good for up to 50 psi which is good for residential and light industrial use. If you have higher water pressures you'll need to get it banded with stronger clamps and a clamping tool. Give us a call and we can help you with this +1 (510) 237-5000
The aluminum cam and groove fitting has a straight body with two openings for connecting two hoses or pipes with cam and groove fittings The body is made of aluminum for lightweight operation, and it has cam lock levers for locking the fitting's male groove adapter into female cam couplers. Equipped with a nitrile rubber seal so it's rated for fuel service transfer, or use in commercial or industrial flow systems, such as water transport and treatment, waste management, and in petroleum systems, among others, but it should not be used in compressed air or steam applications.
All products are shipped within 24 hours of ordering Monday-Friday unless otherwise specified on the individual product description page. Your tracking number will be sent via email. Your item will ship from one of our three warehouses (California, Ohio, New York) depending on your location and stock availability. Most orders ship via USPS Air Priority, UPS Ground, or FedEx Ground. Most items ship free. If you need express shipping, please call us 1 (510) 214-3093 and ask us for help.
Returns on most new and unused items are accepted within 30 days of purchase unless items are described as "Special Order", "Used or Scrap", "Bulk Discounted Orders", "International Orders" or "Rare Fitting" in the product title or description. Custom length hoses are non-returnable. Custom lengths is anything outside of 25, 50, 75, or 100 feet. Customer is responsible for return shipping charges. If a return label is issued from Fire Hose Supply the return shipping fees will be deducted from the refund. A standard 25% restocking fee is applied to all returns. Returns must be approved before sending in. Contact us for an RGA or return slip for approval before you send in your returns. Once your returns slip has been issued it will list instructions with a ship-to address. Any return orders sent without an RGA or previous authorization may be rejected.
✔️ Special Order, Custom Order, Bulk Discount Orders, Rare Fittings & International Order Items
Special order, custom order, bulk discount orders, rare items & international order items cannot be cancelled or returned. Rare fittings include but are not limited to 2" NH (NST) and 3" NH (NST) fittings. Please make sure you are 100% sure of the product specifications you are ordering. If you don't fully understand the products you are ordering, please ask us for help to confirm the correct specifications you're looking for. Special order items are usually non-standard parts or bulk orders that are custom made directly from the factory.